Our Products
RISER and TRACK system

SLICKBAR™ Indonesia Riser and Track system is specially designed to be permanently installed in locations where oil booms are going to be deployed during a response or for permanent installations. The Riser acts as a tide compensators that is installed on the Track and connected to the Oil Boom Connector, so that the boom can go up and down following the water level during low and high tide. The Track is acts as a smooth platform for the riser to go up and down on a flat surface and is usually installed on bulkheads, pilings and other locations

The Riser and Track System is used to allow permanently installed oil boom to work in low and high tides. It will also prevent oil from escaping through the ends of the boom. For Emergency Response, the Riser and Track can also help to prevent any oil from leaking through the end of the boom and allowing responders to quickly use the Riser and Track as an anchor point to pull the oil boom to contain the oil

SLICKBAR™ Indonesia Riser and Track are manufactured by expert teams of Oil Spill Equipment builders and are manufactured in accordance with the International Quality Assurance, ISO 9001: 2008, International Environmental Management Systems, ISO 14001 : 2004 and International Occupational Health & Safety Standards, OHSAS 18001 : 2007.

Other products in this category: